YL-12241 RU CNC ROUTER
Featured
| MODEL | YL-12241 RU | YL-15301 RU | |
| CAPACITY | Max.workpiece sizes | 4 x8 feet | 5 x10 feet |
| TRAVEL | X-axis travel | 1720 mm | 2020 mm |
| Y-axis travel | 2870 mm | 3400 mm | |
| Z-axis travel | 280 mm | 280 mm | |
| Spindle nose to table | 210 mm | 210 mm | |
| Distance between columns | 1387 mm | 1700 mm | |
| TABLE | Table area | 1220x2440 mm | 1550x3060 mm |
| FEED RATE | Cutting feed rate | 8 M/min | 8 M/min |
| X-axis rapid traverse | 40 M/min | 40 M/min | |
| Y-axis rapid traverse | 40 M/min | 40 M/min | |
| Z-axis rapid traverse | 10 M/min | 10 M/min | |
| SPINDLE | Spindle speed (Variable) | 1,000~24,000 rpm | 1,000~24,000 rpm |
| Spindle taper | ISO 30 | ISO 30 | |
| ATC | Magazine type | Umbrella type | Umbrella type |
| Tool shank | ER 32 | ER 32 | |
| Tool numbers | 8 pcs | 8 pcs | |
| Shelf | 8 pcs | 8 pcs | |
| Collect | 8 pcs | 8 pcs | |
| CUTTER | Router bit sizes | 3~80 mm | 3~80 mm |
| Collet sizes | 3~20 mm | 3~20 mm | |
| MOTOR | Spindle motor | 9.6 KW | 9.6 KW |
| X-axis motor | 1.5 KW | 1.5 KW | |
| Y-axis motor | 2 KW | 2 KW | |
| Z-axis motor | 1.5 KW | 1.5 KW | |
| Vacuum pump motor | 7.5 HP | 17.5HP | |
| OTHERS | Air pressure required | 6 kgf/cm² | 6 kgf/cm² |
| Dimentions | 2300x5360x2250 mm | 2300x5840x2250 mm | |
| N.W/G.W | 5500 / 6000 kg | 5800 / 6300 kg |
Dimensions and design characteristics shown on this catalong are subject to change without prior notice